raise and lower power in 1T Panel

General topics forum; please ensure your post follows the forum rules.

raise and lower power in 1T Panel

Postby shtrdthrd » Tue Jan 02, 2018 3:07 pm

This seams like a really stupid question but in the manual it gives this instruction as part of the troubleshoot to test the interupter:
" Use 1T Panel to raise and lower the power and confirm that the LED in the fiber optic transmitter raises and lowers
in brightness accordingly."

What am I supposed to do in the program just raise and lower the volume?
shtrdthrd
Tipsy Toggle Switch
 
Posts: 2
Joined: Tue Jan 02, 2018 3:03 pm

Re: raise and lower power in 1T Panel

Postby Bayley » Wed Jan 03, 2018 3:38 pm

there should be a volume slider (make sure your interrupter is in USB mode and not fixed mode).
User avatar
Bayley
Lord Protector
 
Posts: 1047
Joined: Sat Jan 12, 2013 6:34 pm

Re: raise and lower power in 1T Panel

Postby shtrdthrd » Thu Jan 04, 2018 6:25 pm

I figured it out finally. Leaving the switch to live on the interrupter you go launch the 1T Panel and click the "Fixed Mode" button and the power slider is in the pop-up that appears.
shtrdthrd
Tipsy Toggle Switch
 
Posts: 2
Joined: Tue Jan 02, 2018 3:03 pm


Return to Anything else for discussion?

Who is online

Users browsing this forum: No registered users and 4 guests