Beta oneTesla v.1 finally working
Posted: Thu May 21, 2015 2:40 pm
It's been roughly two and a half years since I got the kit at MIT Splash 2012, but after lots of debugging I recently got it working! I had to make some modifications to the interrupter to get it to work with the v.1 interrupter firmware.
Here are a couple videos:
and a .gif for fun:
I'm thinking about buying a spun aluminum toroid to prevent the sparks flying in other directions.
Here are a couple videos:
Watch on youtube.com
Watch on youtube.com
and a .gif for fun:
I'm thinking about buying a spun aluminum toroid to prevent the sparks flying in other directions.