Page 1 of 1

One Tesla running

PostPosted: Mon Dec 26, 2016 10:39 pm
by Bobsalmon
I've had the original kit for about 2 years now.. Finally got around to assembly and it works great.
During low voltage probing I shorted 2 legs on an IC. so, I replaced the 7805 and 2 -IC's and the board lit right up.
I have some flashover to the Primary at higher power settings.

How far away from the outer perimeter of the Toroid should the breakout be?

Would an RF ground wire help?
If so, where to attach it?

Thanks for any help.