My build of oneTesla
Posted: Sat Jun 22, 2013 8:11 amThis weekend i decided to build one for fun. The PCB was isolation milled on an CNC, most parts used are from recycled junk box (except gate driver IC-s and current transformer).
There is no secondary specs given, so i will have to do my own math on that one. Board is tested and working, just missing the IGBT-s. Very nice from OneTesla to make this project open. The only modification i plan to add is the current limiter.
There is no secondary specs given, so i will have to do my own math on that one. Board is tested and working, just missing the IGBT-s. Very nice from OneTesla to make this project open. The only modification i plan to add is the current limiter.