oneTesla

The way MIDI messages work, you can connect the MIDI cable to several MIDI units. The current loop and optocoupler design makes it possible to just hotwire two MIDI inputs in series, but I do not recommend that. A better way is to use a synth that has a "MIDI through" port, connect the computer MIDI out to the synth MIDI in, and connect the oneTesla interrupter to the MIDI through on the synth. Then make a MIDI file that has the oneTesla sounds in channel 0, and the other sounds in other channels. Last, instruct the synth not to play channel 0, and you should be all set.

Sail Awolnation MIDI tested and working OK on full power.

Hi.
I've made my own, made it shorter and made separations between notes.
Hope the track is more impressive on a small coil now.