tinyQCW

A place for cool projects

tinyQCW

Postby loneoceans » Wed Feb 03, 2016 6:01 pm

Thought this project went well enough to share.

Some of you on this forum might have built a tinyTesla, which I always thought was a really small cute SSTC. One thing I was especially fond of was the small secondary coil it uses which are pretty hard to make by hand since they are wound with very thin wire. I had one tinyTesa secondary coil, so this motivated me to build a QCW tesla coil with it to see how much spark I could get from this small coil.

Watch on youtube.com


Another goal of the project was to make a very small QCW coil that could easily fit on top of a table, but still have good performance and be 'plug and play' easy to operate. The size restriction was that it needed to fit into a medium size USPS box (!). The result is a very compact coil, yet capable of sparks just over 32" or so despite its small size (more than 13x secondary length!).

Image
Photo of the coil on my messy bench.

Image
And of the coil in action.

Coil runs with a 340VDC bus with 4 TO-247 IGBTs. I'm using a pretty fat bus capacitor though I could probably replace that with a bunch of smaller ones and make the coil even smaller!

Enjoy!
User avatar
loneoceans
Magnificent MOSFET
 
Posts: 103
Joined: Mon Feb 11, 2013 12:39 pm

Re: tinyQCW

Postby Bayley » Wed Feb 03, 2016 9:04 pm

I'm so happy that this exists.
User avatar
Bayley
Lord Protector
 
Posts: 1137
Joined: Sat Jan 12, 2013 6:34 pm


Return to Other Projects

Who is online

Users browsing this forum: No registered users and 3 guests


cron