I have struggled to peel the protecting paper off from the acrylic plates. My fingernails were damaged, and some parts between the laser drawing, small papers still left, and it was hard to remove.
One of my friend taught me the tip.
Just to use water. Only that.
After moisturing the paper, its get very easy to peel off.
It's amazing!
- It is currently Sat Apr 27, 2024 6:32 pm • All times are UTC - 5 hours
Easy way to peel the paper off the acrylic plates
3 posts
• Page 1 of 1
Re: Easy way to peel the paper off the acrylic plates
My son and I just used the edge of an xacto knife to peel up the edge. If you've ever worked with vinyl window stickers, you just stick the paper with the tip of the knife, pull up a little bit and it lifts right off.
My YouTube Channel: https://www.youtube.com/user/dragnriot
- ican
- Magnificent MOSFET
- Posts: 136
- Joined: Fri Oct 25, 2013 6:15 pm
Re: Easy way to peel the paper off the acrylic plates
personally , my paper became much harder to deal with , once wet .. the "glue" wanted to stay on the acrylic ... when dry it was not easy , but when the paper did peal away , it came off perfectly clean .. maybe different "batches" behave different
- KevinNewZealand
- Magnificent MOSFET
- Posts: 120
- Joined: Wed Jul 03, 2013 7:44 pm
3 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 6 guests