- It is currently Fri Mar 29, 2024 12:52 am • All times are UTC - 5 hours
Typo in Assembly Instructions
2 posts
• Page 1 of 1
Typo in Assembly Instructions
There is (what I believe) a typo in the Instruction Manual (V 1.1.2) at Step 1.4 "Install C2, C3, and C5 through C16. Note that these are all electrolytic capacitors, and the polarity matters." I think it should read: "Install C2, C3, and C5 through C16. Note that C5 through C7 as well as C15 and C16 are all electrolytic capacitors, and the polarity matters."
- nick@acata-tech.com
- Tipsy Toggle Switch
- Posts: 10
- Joined: Thu Jan 24, 2013 7:40 pm
- Location: Boulder, CO
Re: Typo in Assembly Instructions
Manual 1.2.0 on Site 14 "Resistors"
A brown-black-red resistor has 1 kOhm.
10 x 100 is 1000 not 100.
A brown-black-red resistor has 1 kOhm.
10 x 100 is 1000 not 100.
- BlackX
- Tipsy Toggle Switch
- Posts: 21
- Joined: Wed Jan 23, 2013 5:51 pm
- Location: GB
2 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 2 guests