Hi!
I cannot stay idle for too long.
After getting first results with my custom OneTesla I've been through lots of stuff.
Two types of plasma speakers, LED cube 4x4x4, voltage regulators and other.
Wanted to ask if you could share or point to any other projects.
Not complicated yet spectacular. With accessible schematics and guides.
So I can put my hands to use.
Thank you.
My traced schematics:
- It is currently Mon May 13, 2024 2:58 am • All times are UTC - 5 hours
Other projects
5 posts
• Page 1 of 1
Re: Other projects
Please advise any other SSTCs or DRSSTCs.
I'm thinking to start a project in the nearest future related to induction heating or levitating magnet, have not decided yet.
I'm thinking to start a project in the nearest future related to induction heating or levitating magnet, have not decided yet.
- Frost273
- Magnificent MOSFET
- Posts: 152
- Joined: Fri Nov 08, 2013 11:29 am
- Location: Ukraine
Re: Other projects
One neat thing i found would have to be the ARC plasma speaker. Its a kit and seemed very cool. But seems youve already mentioned plasma speakers
- Tesla kid
- Rambunctious Relay
- Posts: 32
- Joined: Tue Dec 03, 2013 8:03 pm
Re: Other projects
Tesla kid wrote:One neat thing i found would have to be the ARC plasma speaker. Its a kit and seemed very cool. But seems youve already mentioned plasma speakers
I got the ARC Plasma speaker just because, however it just isn't the same as one of the tesla coil based ones:
Watch on youtube.com
Watch on youtube.com
I actually really want to get the ones in the above video however patiently waiting for Fiddy
Watch on youtube.com
-
DJKOR - Magnificent MOSFET
- Posts: 193
- Joined: Sat Aug 17, 2013 4:12 am
- Location: Brisbane, QLD
Re: Other projects
If anyone is interested in Atmel microcontroller programming, but do not have a programmer to start with, I can advise the following project I have found on the internet and have build one for myself.
It is incredibly fast and allover expenses do not exceed 10$.
It is AVRISPmkII clone. Based on AT90USB162 microcontroller and can be programmed itself via FLIP over USB.
Works fine with AVR studio 5.
Links:
Overview of other clones in russian
Googletranslate of the link above
Project files itself
Also this programmer can be used to reprogramm the OneTesla interrupter.
It is incredibly fast and allover expenses do not exceed 10$.
It is AVRISPmkII clone. Based on AT90USB162 microcontroller and can be programmed itself via FLIP over USB.
Works fine with AVR studio 5.
Links:
Overview of other clones in russian
Googletranslate of the link above
Project files itself
Also this programmer can be used to reprogramm the OneTesla interrupter.
- Frost273
- Magnificent MOSFET
- Posts: 152
- Joined: Fri Nov 08, 2013 11:29 am
- Location: Ukraine
5 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 3 guests