Need a help

General topics forum; please ensure your post follows the forum rules.

Need a help

Postby MaxP » Sat Sep 28, 2019 12:54 pm

Hi!

Just started the SD interrupter assembly.
The instruction tells R9 should be 100ohm.

- it is labelled 1k on the board
- it is 1k on the schematic in the download section on the website
- it is 1k on the board layout on the website
- I received it as 1k, so I miss one 100ohm resistor!

Do you confirm the proper contrast will be achieved by a R9 value of 100ohm?

Thanks.
MaxP
Tipsy Toggle Switch
 
Posts: 1
Joined: Sat Sep 28, 2019 12:53 pm

Re: Need a help

Postby Bayley » Thu Oct 03, 2019 12:26 am

1K is the correct value for the current LCD modules.
User avatar
Bayley
Lord Protector
 
Posts: 1293
Joined: Sat Jan 12, 2013 6:34 pm

Re: Need a help

Postby NelonPascal » Mon Oct 14, 2019 1:42 am

For the details you shared, 1K is ok, Thanks
NelonPascal
Tipsy Toggle Switch
 
Posts: 2
Joined: Wed Oct 09, 2019 2:36 pm


Return to Anything else for discussion?

Who is online

Users browsing this forum: No registered users and 1 guest