Safety Warnings
|
Electrical Safety WarningThe Tesla coil creates extremely high voltage and high frequency sparks. NEVER TOUCH THE OUTPUT OF THE TESLA COIL. At best, you will get a nasty burn; at worst, you’ll get a potentially life-threatening shock. The Tesla coil’s control board is also dangerous while the bus capacitors are charged. NEVER SERVICE THE BOARD WHILE IT IS POWERED ON. ALWAYS WAIT AT LEAST FIVE MINUTES AFTER THE BOARD IS POWERED OFF FOR CAPACITORS TO DISCHARGE BEFORE SERVICING.
|
|
|
Adult Supervision RequiredUsers under 18 should only use this kit under the supervision of an experienced adult.
|
|
|
Pacemaker WarningPersons with electronic medical implants such as pacemakers should not be near the Tesla coil during operation. EMI from the coil may interfere with the pacemaker’s function.
|
|
|
Ear Protection RecommendedThe Tesla coil output is loud. Ear protection is recommended.
|
|
|
Ozone WarningThe high temperature of the Tesla coil streamers causes the gases that make up air to form other compounds, including ozone (which can often be smelled when the coil is in operation) and nitrogen oxides. Keep the Tesla coil work area well-ventilated to prevent the buildup of irritating gases such as ozone and nitrogen oxides, which become toxic if concentrated.
|
|
|
Fire HazardThe arcs from the Tesla coil can set flammable objects on fire. Keep all flammable objects away from the Tesla coil while it is in operation.
|
|
|
Safety Glasses RequiredAlways wear eye protection while soldering. Power semiconductors may overheat and fail violently, causing a shrapnel hazard. Wear safety glasses when working on the board while it is energized. Only power up the board when it is fully enclosed inside the chassis.
|
|
|
RF WarningKeep sensitive electronics away from the Tesla coil at all times. Use the entire length of the included fiber optic cable to distance your computer from the Tesla coil.
|