Replacement parts set for the SD card interrupter

The SD card interrupter components include:

1 Crystal, 16MHz
1. 3 Capacitor, Ceramic 1uF 50V
2. 2 Capacitor, Ceramic 18pF
3. 2 Resistor, 10K 1/4W
4. 2 Resistor, 100 ohm 1/4W
5. 3 Resistor, 1K 1/4W
6. 1 Resistor, 3.3K 1/4W
7. 1 Resistor, 220R 1/4W
8. 1 Resistor, 100K 1/4W
9. 1 Header, 0.1" 16 position (male)
10. 1 Header, 0.1" 16 position (female)
11. 1 MIDI Jack, DIN5
12. 2 CR123 battery holder
13. 2 Switch, board-mount Slide SPDT
14. 1 6-pin socket
15. 1 16-pin socket
16. 1 28-pin socket
17. 3 Switch, momentary tactile, 30mm height, 6mmx6mm
18. 1 LCD module, HD44870 compatible
19. 1 M3 10mm screw
20. 1 10mm nut
21. 1 ATMega328
22. 1 IC, Level Shifter
23. 1 IC, Optoisolator 4N25
24. 1 Regulator, 5V TO-92
25. 1 Regulator, 3.3V TO-92
26. 1 Optical transmitter TTL
27. 1 Diode, 50V signal 100mA
28. SD interrupter PCB with SD card slot pre-soldered

Please note that this kit does not contain the hardware or chassis for the SD interrupter kit.