Page 1 of 1

Finished

PostPosted: Fri May 31, 2019 9:47 pm
by coil1002
Pretty straight forward build took me a day to build 2 days to varnish the coil. One day to blow every component on the bridge (pro tip be sure the power strip on your bench has a third prong before running your coil on it. Running coils without a ground is a big no no) couple hours to replace components lucky I know all too well how testing goes and had them on hand. Oh and a few hours of wanting to die due to having to put the end caps together on the secondary

All this to get to here

https://www.youtube.com/watch?v=7thZ0R-vWBg

Well worth the journey