Sadly the slot for the SD-Card was dead on arrival, but for now I am just using the live function plus Synthesia extensively.
After some more and some less successful test runs I got most things sorted out, but 2 matters are still a bit unclear, and I am sure here are people way more knowledgeable than me around.
![Very Happy :D](./images/smilies/icon_e_biggrin.gif)
- What fuse should I use? (I have the international version of the kit.) Till now I have been using 4A fast-blow fuses, 250V voltage rating; the one that came with the kit / you can buy as replacement part here on the site. But it seems to me, that even when just turning the power strip on and off, there is a chance that the in-rush-current alone blows the fuse. In the manual it's a 10A one.
- How important is a grounding-plate and what would a perfect setup in general look like? I am well aware that a DRSSTC is a little diva when it comes to it's surroundings, but I am not sure how big or massive it has to be. Should it be as large as possible or just big enough for the heatsink to stand on it and is aluminum foil fine?
When I got the time I will upload a few vids of my coil in action and update this post.