Success - TinyTesla
Posted: Wed Feb 17, 2021 1:55 pm
Managed to get this thing working on the first try (although I may or may not have melted the midi controller the first time and had to order a replacement). Started by covering this thing in many layers of polyurethane but after reading a few other posts I decided to just wrap the thing in electrical tape. First layer over the secondary. Then another layer of the primary
Thank you for the great project
Test one - Atenna was too close
Test two - In the dark
Thank you for the great project
Test one - Atenna was too close
Test two - In the dark