- It is currently Tue May 21, 2024 11:15 am • All times are UTC - 5 hours
Sail - Awolnation MIDI help
13 posts
• Page 2 of 2 • 1, 2
Re: Sail - Awolnation MIDI help
The way MIDI messages work, you can connect the MIDI cable to several MIDI units. The current loop and optocoupler design makes it possible to just hotwire two MIDI inputs in series, but I do not recommend that. A better way is to use a synth that has a "MIDI through" port, connect the computer MIDI out to the synth MIDI in, and connect the oneTesla interrupter to the MIDI through on the synth. Then make a MIDI file that has the oneTesla sounds in channel 0, and the other sounds in other channels. Last, instruct the synth not to play channel 0, and you should be all set.
- stegu
- Magnificent MOSFET
- Posts: 378
- Joined: Tue Jan 15, 2013 4:56 pm
- Location: Norrkoping, Sweden
Re: Sail - Awolnation MIDI help
Sail Awolnation MIDI tested and working OK on full power.
- XxRyan787xX
- Tipsy Toggle Switch
- Posts: 20
- Joined: Tue Sep 03, 2013 12:11 am
Re: Sail - Awolnation MIDI help
Hi.
I've made my own, made it shorter and made separations between notes.
Hope the track is more impressive on a small coil now.
I've made my own, made it shorter and made separations between notes.
Hope the track is more impressive on a small coil now.
- Attachments
-
- 1.png
- (74.25 KiB) Not downloaded yet
- Frost273
- Magnificent MOSFET
- Posts: 152
- Joined: Fri Nov 08, 2013 11:29 am
- Location: Ukraine
13 posts
• Page 2 of 2 • 1, 2
Who is online
Users browsing this forum: No registered users and 7 guests