My Next Monster..MUUUaaahahahahahah!!
Posted:
Fri Nov 01, 2013 9:45 am
by Cyborgcnc
OK, so this is what I am working on....All done in Solidworks...more details to follow....
Re: My Next Monster..MUUUaaahahahahahah!!
Posted:
Thu Nov 07, 2013 11:49 pm
by Bayley
mmm gotta love them tube coils...
It might run better without the topload though; tube coils often have enough trouble breaking out without a topload (the output voltage is significantly lower than in a DRSSTC) and they don't really care about the resonant frequency that much (tubes are good for several MHz).