My EVR Microbrute DRSSTC

A place for cool projects

My EVR Microbrute DRSSTC

Postby Fiddy » Wed Nov 27, 2013 12:31 am

G'day,

Here is my Microbrute DRSSTC from eastern voltage research that i built last year, im in Australia so im using a 2kW step down to 110V.

heres the original build thread: http://laserpointerforums.com/f60/holid ... 78988.html

Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image

http://www.youtube.com/watch?v=4n1_IMVdDJQ
http://www.youtube.com/watch?v=3QhK_0GIp-8
http://www.youtube.com/watch?v=_HojUdzsElA
Pico SGTC
Nano SSTC
Audio Modulated SSTC
Audio Modulated Bipolar SSTC
TinyTesla SSTC
Onetesla TS DRSSTC
OneTesla DRSSTC
EVR MicroBrute DRSSTC
User avatar
Fiddy
Terrific Tube
 
Posts: 89
Joined: Tue Jan 15, 2013 6:31 pm
Location: Australia

Re: My EVR Microbrute DRSSTC

Postby DJKOR » Wed Nov 27, 2013 1:34 am

As I was looking through the photos, I was like "that pointed top looks familiar". I was referring to this:

viewtopic.php?f=9&t=8&p=23#p23

Also noticed you Wicked Laser there. How did you go with shipping that one here? I was tempted but I already lost a laser pointer and other things to Customs before so I didn't want to risk it. Ended up ordering a lower power RGB laser when I was in Hawaii and had it sent to the hotel for me to take back. I was tempted to get a 1 watt one but wanted something that was relatively safer to look at. I just wanted a blue one really.

Image Image

Anyways, enough rambling. I had always wanted to get one of those kits from EVR. Every now and again I would look there and think of getting it until one day I Googled for a kit and saw the oneTesla. At the price it was available for and with 240V support out of the box, I was instantly sold. I like how with the microBrute you can do Low Frequency Long PW. Looks quite nice.

The Plasmasonic that they are advertising now looks pretty neat but quite a pricy setup. After building the oneTesla though, I am quite hooked on it now so I'm thinking of building something large... probably will be a good old fashioned spark gap type.

On a side note, I was keeping an eye on EVR and noticed they posted some links for an upcoming QCW Tesla Coil. They removed the link from their homepage, but it still exists. I'm quite interested in this one:

http://www.easternvoltageresearch.com/drsstc_qcw.html
Image
My build thread: viewtopic.php?f=15&t=998 | 246kHz Primary / 267kHz Secondary
User avatar
DJKOR
Magnificent MOSFET
 
Posts: 193
Joined: Sat Aug 17, 2013 4:12 am
Location: Brisbane, QLD

Re: My EVR Microbrute DRSSTC

Postby Fiddy » Wed Nov 27, 2013 1:56 am

I make the pointed breakout points on the lathe then polish them up, makes the coil look heaps tough!

Good stuff, yeah i wish the EVR had 240V support, im toying with the idea of removing the voltage dubbler from the board and replacing it with a full bridge rectifer so it works from 240V straight up without a stepdown transformer.

yeah the advanced modulator is pretty fun, i just ordered the midi controller for the Microbrute too so ill be playing some tunes like the Onetesla.

The Plasmasonic is huge and runs from 110AC :( have you seen there full audio modulated Plasmasonic kit?

http://www.easternvoltageresearch.com/a ... sonic.html

That would be fun to do aswell.

Mmmm large spark gap sounds fun!

I saw they removed the QCW tesla coil from their site, i was waiting for them to release it, hope it still exists too, i had a look and its pretty complicated how it ramps the bus voltage up to acheive those sword like sparks.

heres a photo today, now i have a signal generator i can tune like a boss, was trying to get my microbrute secondary resonant frequency down!

Image
Pico SGTC
Nano SSTC
Audio Modulated SSTC
Audio Modulated Bipolar SSTC
TinyTesla SSTC
Onetesla TS DRSSTC
OneTesla DRSSTC
EVR MicroBrute DRSSTC
User avatar
Fiddy
Terrific Tube
 
Posts: 89
Joined: Tue Jan 15, 2013 6:31 pm
Location: Australia

Re: My EVR Microbrute DRSSTC

Postby Alex » Thu Nov 28, 2013 5:17 pm

they're not going to finish the qcw kit, apparently it's too complicated

hm… make a one board qcw kit?
Alex
Incredible IGBT
 
Posts: 627
Joined: Sun Jan 13, 2013 12:16 pm

Re: My EVR Microbrute DRSSTC

Postby Fiddy » Mon Dec 02, 2013 5:59 am

dam, was hoping it would come out soon, yeah onetesla take on the QCWSSTC!
Pico SGTC
Nano SSTC
Audio Modulated SSTC
Audio Modulated Bipolar SSTC
TinyTesla SSTC
Onetesla TS DRSSTC
OneTesla DRSSTC
EVR MicroBrute DRSSTC
User avatar
Fiddy
Terrific Tube
 
Posts: 89
Joined: Tue Jan 15, 2013 6:31 pm
Location: Australia

Re: My EVR Microbrute DRSSTC

Postby ican » Fri Dec 13, 2013 1:38 pm

My friends and I are working on the QCW coil soon... I'll keep you updated.
ican
Magnificent MOSFET
 
Posts: 136
Joined: Fri Oct 25, 2013 6:15 pm

Re: My EVR Microbrute DRSSTC

Postby Fiddy » Sat Dec 14, 2013 1:18 am

Oh mad, good luck man!
Pico SGTC
Nano SSTC
Audio Modulated SSTC
Audio Modulated Bipolar SSTC
TinyTesla SSTC
Onetesla TS DRSSTC
OneTesla DRSSTC
EVR MicroBrute DRSSTC
User avatar
Fiddy
Terrific Tube
 
Posts: 89
Joined: Tue Jan 15, 2013 6:31 pm
Location: Australia


Return to Other Projects

Who is online

Users browsing this forum: No registered users and 5 guests


cron