Full replacement parts for the tinyTesla musical Tesla coil kit

This set includes the main board components, the silicon components, and the interrupter components for the tinyTesla musical Tesla coil kit.

The main board components include the following:

1. 3 Capacitors, 100uF 16V
2. 2 Resistors, 100K 1/4W
3. 1 Resistor, 4.7 ohm 1/4W
4. 2 Capacitors, 47uF 200V
5. 4 Capacitors, 1uF 50V
6. 1 small ring terminal
7. 1 large ring terminal
8. 1 3.96mm JST right-angle header
9. 1 0.1" 3-position right-angle header
10. 1 Fuse, 4A fast
11. 2 fuse clips
12. 1 3" AWG 22 jumper
13. 2 2-pin .1" phasing headers
14. 2 2-pin .1" phasing jumpers
15. 1 14 pin socket
16. 1 8 pin socket
17. 1 1" heat sink tubing
18. 1 120VAC:12VAC 1.2VA transformer
19. main PCB with GDT attached

The silicon components include:

1. 1 Optical Receiver, TTL
2. 1 Dual Gate Driver, Inverting + non-Inverting,4A
3. 1 Hex Schmitt Trigger Inverter 7414
4. 2 Diodes, 100V 200mA
5. 1 Bridge Rectifier, 50V 1A
6. 1 LDO, 5V, TO-92
7. 1 LDO, 15V, TO-92
8. 1 Bridge Rectifier, 400V 2A
9. 2 IGBT, 40A 600V
10. 2 TO-220 sil pad

The USB interrupter components include:

1. 1 1.5K resistor
2. 2 68 ohm resistors
3. 1 100 ohm resistor
4. 1 1uF capacitor
5. 1 USB connector
6. 1 Board-mount slide switch
7. tinyTesla musical Tesla coil kit interrupter PCB
8. optical transmitter
9. ATTiny
10. 2 3.3V zener diodes
11. 1 8-pin socket